June 2, 2010
Click below to watch the ABS Tech Tip 3: Peter Orlando with the third of his ABS Tech Tip clips, this time with a hydraulic tip that you can use on any brake system. Peter gives us the breakdown on some tips for monitoring and controlling contaminate issues during a brake system service that can cause problems with the ABS system.
Watch Now.
Click Here.
June 2, 2010
Click below to watch the ABS Tech Tip 2: In this clip instructor Peter Orlando gives us some hands on instruction on resistance testing ABS solenoid assemblies. Peter gives several in depth tips tricks and gotchas related to resistance testing the isolation valves and working with the component schematics to perform the pin out testing.
Watch Now.
Click Here.
June 2, 2010
Click below to watch the ABS Tech Tip 1: In this tech tip clip, Instructor Peter Orlando gives you a helpful tip concerning your new ABS wheel speed sensor. He explains to you how to use your voltmeter and a screwdriver to test if the new part is bad or good BEFORE you even put it in the car.
Watch Now.
Click Here.
June 2, 2010
Click below to watch the Data Bus Case Study – 2004 Malibu: In this tip clip case study instructor Dave Hobbs presents the case study of a 2004 Malibu with a no start condition. Diagnostics later revealed a short in the radio causing the rest of the components on that bus to be unable to communicate. In this Tip Clip Dave gives some helpful info on diagnosing these types of interconnected problems.
Watch Now.
Click Here.
May 12, 2010
Click below to watch the 4L60E-Pressure Switch Manifold Quick Tip: From 1993 to 2008 the GM 4l60E transmission used a pressure switch manifold to tell the computer what gear was selected. In this Tip Clip instructor Wayne Colonna gives a detailed technical overview of this component with some helpful info on diagnosing associated problems.
Watch Now.
Click Here.